Laan D.C., Knoll A., Carota G., Hazelton D., Jaroszynski J., Abraimov D., Weiss J.D., Francis A., Bradford G., Small M.A.
Ключевые слова: presentation, magnets, HTS, REBCO, coated conductors, deposition setup, measurement setup, long conductors, uniformity, critical caracteristics, critical current, angular dependence, magnetic field dependence, temperature dependence, measurement technique, mechanical properties, tensile tests, stress effects, strain effects, laminations, thickness dependence, width
Hazelton D.W., Abrahamsen A.B., Grivel J., Sundaram A., Zermeno V.M., Wulff A.C., Lundeman J.H., Opata Y.A., Insinga A.R., Ryming A.E., Schweer-Gori F.
Ключевые слова: presentation, HTS, coated conductors, MOCVD process, REBCO, long conductors, critical caracteristics, critical current, homogeneity, width, magnetic field dependence, temperature dependence, mechanical properties, tensile tests, stress effects, pinning, thickness dependence, CORC cables, current-voltage characteristics, status
Ключевые слова: presentation, HTS, REBCO, coated conductors, critical caracteristics, critical current, magnetic field dependence, mechanical properties, measurement setup, tensile tests, stress effects, strain effects, thickness dependence, substrate Hastelloy, stabilizing layers, n-value, irreversible strain, microstructure, laminations, delamination
Ключевые слова: mechanical properties, measurement setup, bending radius, tensile tests, strain effects, stress effects, stabilizing layers, thickness dependence, transverse stress, presentation, HTS, REBCO, coated conductors, IBAD process, MOCVD process, substrate Hastelloy, critical caracteristics, critical current, homogeneity, long conductors, Jc/B curves, width, electromechanical analysis
Welp U., Knoll A., Zhang Y., Hazelton D., Ivanyushenkov Y., Kesgin I., Doose C., Kasa M., Brownsey P.
Zhang Y., Hazelton D.W., Schmidt R.M., Nakasaki R., Knoll A.R., Abraimov D., Sundaram A., Brownsey P., Kasahara M., Fukushima T., Carota G.M., Cameron J.B., Schwab G., Hope L.V., Kuraseko H.
Ключевые слова: presentation, HTS, coated conductors, REBCO, fabrication, review, IBAD process, MOCVD process, substrate Hastelloy, critical caracteristics, critical current, magnetic field dependence, temperature dependence, angular dependence, uniformity, long conductors, width, mechanical properties, tensile tests, transverse stress, strain effects, stress effects, measurement technique, substrates, thickness dependence, doping effect, composition, microstructure, grain size, contact characteristics, current-voltage characteristics, insulation
Ключевые слова: HTS, coated conductors, REBCO, critical caracteristics, critical current, angular dependence, uniformity, long conductors, n-value, measurement setup, mechanical properties, tensile tests, transverse stress, self-field effect, magnetic field dependence, comparison, doping effect, microstructure, substrate Hastelloy, thickness dependence, current-voltage characteristics, joints, presentation
Ключевые слова: HTS, REBCO, coated conductors, mechanical properties, measurement setup, measurement technique, tensile tests, transverse stress, critical caracteristics, critical current, irreversible strain, stress effects, strain effects, stabilizing layers, thickness dependence, microstructure, local distribution, presentation
Ключевые слова: HTS, REBCO, coated conductors, coils, thermal performance, mechanical properties, presentation
Ключевые слова: HTS, coated conductors, critical caracteristics, critical current, magnetic field dependence, substrate Hastelloy, thickness dependence, uniformity, long conductors, Roebel conductors, stress effects, strain effects, mechanical properties, stabilizing layers, tensile tests, coils pancake, current-voltage characteristics, n-value, heat loads, experimental results, presentation
Ключевые слова: HTS, coated conductors, coils, thermal properties, mechanical properties, modeling, presentation
Ключевые слова: HTS, coated conductors, REBCO, substrate Hastelloy, critical caracteristics, thickness dependence, CORC cables, microstructure, critical current, magnetic field dependence, electropolishing process, defects, buffer layers, fabrication, texture, uniformity, MOCVD process, cap layers, mechanical properties, stress effects, strain effects, tensile tests, experimental results, presentation
Ключевые слова: HTS, REBCO, coated conductors, MOCVD process, IBAD process, laminations, degradation studies, coils, critical caracteristics, current-voltage characteristics, critical current distribution, mechanical properties, measurement setup, tensile tests, surface, angular dependence, microstructure, experimental results, presentation, delamination
Ключевые слова: coated conductors, YBCO, presentation, REBCO, HTS, MOCVD process, IBAD process, substrate Hastelloy, thickness dependence, critical caracteristics, critical current, magnetic field dependence, uniformity, n-value, tensile tests, stress effects, strain effects, FCL resistive, current limiting characteristics, recovery characteristics, transformer current limiting, resistance, temperature dependence, status
Ключевые слова: HTS, coated conductors, magnetic systems, commercialization, critical caracteristics, Jc/B curves, temperature dependence, doping effect, mechanical properties, stress effects, strain effects, loads, cycling, critical current, coils insert, funding, angular dependence, SMES, FCL, review, power equipment, presentation
Ключевые слова: presentation, irreversibility fields, temperature dependence, HTS, YBCO, REBCO, coated conductors, substrate Hastelloy, IBAD process, MOCVD process, mechanical properties, tensile tests, stress effects, strain effects, stabilizing layers, thickness dependence, bending process, critical caracteristics, joints, joint resistances, laminations, loads, displacements
Ключевые слова: HTS, YBCO, REBCO, coated conductors, coils, critical caracteristics, Jc/B curves, microstructure, long conductors, critical current, uniformity, mechanical properties, stress effects, strain effects, tensile tests, thermal properties, cycling, current-voltage characteristics, winding techniques, presentation
Ключевые слова: presentation, HTS, coated conductors, coils pancake, winding techniques, fabrication, design, critical caracteristics, current-voltage characteristics, thermal performance, cycling, mechanical properties, stress effects, thermal stress, strain effects, angular dependence, termination, current leads, joints, joint resistances
Ключевые слова: HTS, coated conductors, critical caracteristics, mechanical properties, laminations, critical current, magnetic field dependence, temperature dependence, homogeneity, n-value, tensile tests, stress effects, stabilizing layers, thickness dependence, strain effects, coils pancake, current-voltage characteristics, winding techniques, insulating medium, current limiting characteristics, Roebel conductors, joints, joint resistances, bending process, presentation
Ключевые слова: HTS, coated conductors, mechanical properties, strain effects, stress effects, tensile tests, critical caracteristics, critical current, critical caracteristics, laminations, winding techniques, coils, insulating medium, stainless steel, critical current density, temperature dependence, magnetic field dependence, pinning, doping effect, angular dependence, REBCO, composition, measurement technique, review, homogeneity, long conductors, n-value, Roebel conductors, joints, joint resistances, bending process, presentation
Ключевые слова: HTS, YBCO, REBCO, coated conductors, fabrication, homogeneity, critical caracteristics, critical current, n-value, roughness, substrate Hastelloy, texture, angular dependence, magnetic field dependence, measurement setup, mechanical properties, tensile tests, strain effects, stress effects, laminations, measurement setup, displacements, Roebel conductors, CORC cables, twisting, insulation, presentation
Ключевые слова: HTS, YBCO, REBCO, coated conductors, critical caracteristics, critical current, homogeneity, angular dependence, coils poloidal field, composition, measurement setup, mechanical properties, stress effects, strain effects, tensile tests, laminations, insulating medium, stainless steel, coils, current-voltage characteristics, resistance, temperature dependence, presentation
Ключевые слова: HTS, coated conductors, REBCO, review, power equipment, critical caracteristics, temperature dependence, magnetic field dependence, angular dependence, homogeneity, critical current, mechanical properties, tensile tests, stress effects, strain effects, economic analysis, joint resistances, presentation
Ключевые слова: HTS, coated conductors, coils, YBCO, REBCO, joints, joint resistances, test results, winding configurations, insulation, review
Ключевые слова: HTS, YBCO, coated conductors, thermal stability, nitrogen liquid , surface, roughness, quench properties, overcurrent, heat transfer, experimental results
Ключевые слова: HTS, YBCO, REBCO, coated conductors, review, mechanical properties, stress effects, strain effects, critical caracteristics, critical current, economic analysis, power equipment, funding, collaborations, SMES, FCL, coils, ac losses, winding configurations, rotating machines, presentation
Ключевые слова: HTS, REBCO, fabrication, review, coils, coated conductors, mechanical properties, strain effects, stress effects, critical caracteristics, critical current, magnetic field dependence, transformer current limiting, SMES, wind farms application, angular dependence, funding, presentation
Zhang Y., Selvamanickam V., Hazelton D.W., Knoll A.R., Majkic G., Sundaram A., Soloveichik S., Repnoy S., McClure R.B.
Ключевые слова: HTS, YBCO, coated conductors, critical caracteristics, Jc/B curves, temperature distribution, doping effect, mechanical properties, stress effects, SMES, transformers, FCL resistive, design, matrix, current limiting characteristics, test results, cables three-in-one, current-voltage characteristics, ac losses, rotating machines, generators, motors, power equipment, presentation
Ключевые слова: HTS, coated conductors, YBCO, critical caracteristics, Jc/B curves, temperature dependence, cables three-in-one, current-voltage characteristics, current limiting characteristics, FCL resistive, transformer current limiting, doping effect, MOCVD process, critical current density, angular dependence, magnetic field dependence, coils, rotating machines, SMES, review, power equipment, presentation
Ключевые слова: HTS, REBCO, coated conductors, doping effect, critical caracteristics, critical current, angular dependence, defects, nanoscaled effects, microstructure, magnetic field dependence, critical current density, temperature dependence, mechanical properties, stress effects, elastic behavior, fatigue behavior, strain effects, long conductors, homogeneity, joint resistances, coils, SMES, power equipment, presentation
Ключевые слова: HTS, REBCO, coated conductors, doping effect, critical caracteristics, critical current, angular dependence, defects, nanoscaled effects, microstructure, magnetic field dependence, mechanical properties, stress effects, strain effects, fatigue behavior, elastic behavior, homogeneity, long conductors, joint resistances, coils, transformers, SMES, power equipment, presentation
Ключевые слова: SMES, cryogenic systems, cryostat, LTS, NbTi, coils toroidal, HTS, coated conductors, critical caracteristics, Jc/B curves, modeling, presentation, power equipment
Zhang Y., Selvamanickam V., Hazelton D.W., Knoll A.R., Duval J.M., Majkic G., Sundaram A., Soloveichik S., Brownsey P., McClure R.B., Repnoy S.
Zhang Y., Selvamanickam V., Hazelton D.W., Knoll A.R., Duval J.M., Majkic G., Sundaram A., Soloveichik S., Brownsey P., McClure R.B., Repnoy S.
Selvamanickam V., Hazelton D., Langston J., Steurer M., Bogdan F., Llambes J.C., Majkic G., Kesign I., Duval J., Albertini M., Repnoy S., Hauer J., Crook D., Ranner S., Williams T., Coleman M.
Ключевые слова: HTS, YBCO, coated conductors, FCL resistive, quench, current limiting characteristics, modular system, cooling technology, critical caracteristics, current-voltage characteristics, recovery characteristics, loads, impedance, design parameters, power equipment, review, nitrogen sub-cooled
Fleshler S., Hazelton D., Gamble B., Gouge M., Demko J., Marchionini B., Eckroad S., McCall J., Hassenzahl W., Reddy N., Ulliman J., Dalstrom T., Selvamanickaml V., Butler S, . Haught D.
Xie Y., Selvamanickam V., Hope L., Hazelton D., Soloveichik S., Dackow J., Liebl B., Bucinell R., Brown A.
Ключевые слова: presentation, HTS, YBCO, coated conductors, mechanical properties, tensile tests, stress effects, measurement technique
Selvamanickam V., Hazelton D., Langston J., Steurer M., Bogdan F., Majkic G., Kesgin I., Llambes J.H., Duval J., Albertini M., Repnoy S., Hauer J., Crook D., Ranner S., Williams T., Coleman M.
Ключевые слова: presentation, HTS, YBCO, coated conductors, coils, design, critical caracteristics, critical current density, magnetic field dependence, temperature dependence, critical current, angular dependence, irreversibility fields, coated conductors multifilamentary, mechanical properties, stress effects, experimental results
Selvamanickam V., Hazelton D., Langston J., Steurer M., Bogdan F., Llambes J.C., Majkic G., Kesgin I., Duval J., Albertini M., Repnoy S., Hauer J., Crook D., Ranner S., Williams T., Coleman M.
Ключевые слова: HTS, coated conductors, REBCO, critical current, critical caracteristics, presentation, angular dependence, joint resistances, mechanical properties, stress effects, strain effects, cycling, thermal expansion, Jc/B curves, LTS, NbTi, Nb3Sn, comparison, coils insert, design parameters, upper critical fields, current, YBCO, experimental results, magnetic properties
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Hazelton D., Rar A., Marchevsky M., Llambes J., Dackow J.
Ключевые слова: presentation, HTS, coated conductors, YBCO, IBAD process, MOCVD process, texture, long conductors, homogeneity, critical caracteristics, critical current, Jc/B curves, cables three-in-one, current-voltage characteristics, ac losses, power transmission lines, coils, FCL resistive, power equipment, thickness dependence, critical current density, angular dependence, Roebel conductors, review
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Hazelton D., Rar A., Dackow J.
Ключевые слова: presentation, HTS, REBCO, YBCO, coated conductors, mechanical properties, stress effects, critical caracteristics, critical current, critical current distribution, long conductors, Jc/B curves, temperature dependence, coils pancake, angular dependence, doping effect, experimental results
Ключевые слова: presentation, review, coated conductors, HTS, YBCO, cables three-in-one, critical caracteristics, current-voltage characteristics, ac losses, cryogenic systems, test results, FCL resistive, matrix, current limiting characteristics, fault currents, dielectric properties, recovery characteristics, high voltage process, generators, coils racetrack, thermal performance, cycling, coils insert, coils pancake, high field tests, REBCO, doping effect, power equipment
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Hazelton D., Rar A., Llambes J., Dackow J.
Ключевые слова: HTS, YBCO, coated conductors, IBAD process, MOCVD process, high rate process, texture, critical current, long conductors, critical current distribution, critical caracteristics, Jc/B curves, temperature dependence, angular dependence, doping effect, coils, design parameters, magnetic properties, coils insert, current limiting characteristics, FCL resistive, modular system, test results, mechanical properties, stress effects, quench properties, power equipment, presentation
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Hazelton D., Rar A., Llambes J., Dackow J.
Ключевые слова: HTS, YBCO, coated conductors, long conductors, critical current distribution, cables three-in-one, test results, critical caracteristics, current-voltage characteristics, ac losses, Jc/B curves, critical current, angular dependence, coils, design parameters, magnetic properties, coils insert, generators, quench properties, current limiting characteristics, FCL resistive, modular system, test results, power equipment, presentation
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Hazelton D., Rar A., Schmidt R., Dackow J.
Ключевые слова: HTS, YBCO, coated conductors, economic analysis, presentation
Ключевые слова: presentation, economic analysis, coated conductors, substrates, MOCVD process, magnetron sputtering, electroplating process, stabilizing layers, fabrication, buffer layers, control systems, critical caracteristics, homogeneity, critical current, angular dependence, magnetic field dependence, cables three-in-one, HTS, Bi2223, YBCO, cryogenic systems, FCL resistive, modular system, coils racetrack, transformers, rotating machines, power equipment
Ключевые слова: presentation, HTS, YBCO, coated conductors, long conductors, mechanical properties, stress effects, strain effects, critical current, magnetic field dependence, temperature dependence, coils insert, design parameters, current-voltage characteristics, magnetic field distribution, power equipment, critical caracteristics
Ключевые слова: HTS, YBCO, coated conductors, FCL resistive, collaborations, plans, funding, grid operation, power equipment, presentation
Ключевые слова: presentation, HTS, YBCO, coated conductors, critical current, angular dependence, current-voltage characteristics, joint resistances, mechanical properties, strain effects, stress effects, loads, cycling, thermal expansion, coated conductors multifilamentary, ac losses, coils insert, experimental results, power equipment, critical caracteristics
Xiong X., Qiao Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Hazelton D., Rar A., Schmidt R., Gogia B., Marchevsky M., Xie Y.-.
Ключевые слова: presentation, HTS, coated conductors, pilot-scale, fabrication, cables three-in-one, grid operation, YBCO, REBCO, MOCVD process, doping effect, critical current, angular dependence, defects columnar, coils, joints, anisotropy, current-voltage characteristics, economic analysis, power equipment, critical caracteristics, status
Xiong X., Qiao Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Hazelton D., Weber C., Rar A., Schmidt R., Gogia B., Marchevsky M., Xie Y.-.
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Hazelton D., Rar A., Schmidt R., Marchevsky M.
Weijers H.W., Larbalestier D.C., Selvamanickam V., Hazelton D.W., Holtz R.L., Markiewicz W.D., Duval J.M.
Ключевые слова: FCL resistive, prototype, HTS, YBCO, coated conductors, cryogenic systems, loads, recovery characteristics, funding, power equipment, presentation
Selvamanickam V.(selva@igc.com), Xiong X., Hazelton D.W., Zhang X., Tekletsadik K., Xie Y.-Y, Lenseth K.P., Schmidt R.M., Qiao Y.(yqiao@igc.com)
Ключевые слова: coated conductors, review, YBCO, coils pancake, IBAD process, MOCVD process, FCL resistive, HTS, power equipment, fabrication
Hazelton D., Tekletsadik K., Xie Y.Y.(yxie@igc.com.), Applications V.S.
Ключевые слова: HTS, YBCO, FCL resistive, quench current, quench time, experimental results, coated conductors, power equipment
Ключевые слова: HTS, coated conductors, FCL resistive, high voltage process, modeling, presentation, matrix, power equipment
Ключевые слова: plans, HTS, YBCO, coated conductors, presentation, review, fabrication, critical current, thickness dependence, IBAD process, MOCVD process, Jc/B curves, mechanical properties, commercialization, high rate process, power transmission lines, cables three-in-one, ac losses, fault currents, recovery characteristics, Roebel conductors, coils, power equipment, critical caracteristics, substrate Hastelloy
Ключевые слова: presentation, HTS, YBCO, coated conductors, high rate process, economic analysis, critical current, thickness dependence, long conductors, Jc/B curves, mechanical properties, tensile tests, stress effects, strain effects, coils insert, design parameters, current-voltage characteristics, magnetic field density, power equipment, critical caracteristics, fabrication, magnetic properties
Ключевые слова: presentation, HTS, YBCO, coated conductors, high rate process, economic analysis, critical current, thickness dependence, long conductors, Jc/B curves, mechanical properties, tensile tests, stress effects, strain effects, coils insert, design parameters, current-voltage characteristics, magnetic field density, bending process, power equipment, critical caracteristics, fabrication, magnetic properties
Xiong X., Qiao Y., Selvamanickam V., Xie Y.Y., Hazelton D.W., Reeves J.L., Chen Y., Zhang X., Tekletsadik K., Lenseth K.P., Schmidt R.M., Rar A.
Ключевые слова: HTS, YBCO, coated conductors, IBAD process, MOCVD process, long conductors, coils pancake, FCL resistive, review, power equipment, fabrication
Ключевые слова: FCL resistive, HTS, Bi2212, current limiting characteristics, bulk, tubes, YBCO, coated conductors, test results, recovery characteristics, presentation, power equipment
Li Y., Xiong X., Qiao Y., Reeves J., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Salagaj T., Hazelton D., Reis C., Yumura H., Weber C.
Cole M.J., Demko J.A., Hazelton D.W., Weber C.S., Reis C.T., Schwenterly S.W., Pleva E.F., Mehta S., Golner T., Aversa N.
Ключевые слова: HTS, transformers, design, design, test results, power equipment
Ключевые слова: FCL inductive, matrix, quench properties, HTS, bulk, tubes, patents, power equipment
Noe M.(mathias.noe@itp.fzk.de), Hassenzahl W.V.(advenergy1@aol.com), Hazelton D.W.(dhazelton@igc.com), Johnson B.K.(bjohnson@ece.uidaho.edu), Komarek P.(peter.komarek@itp.fzk.de), Reis C.T.(creis@igc.com)
Ключевые слова: HTS, cables, ac performance, dc performance, FCL, SMES, transformers, cryogenic systems, review, power equipment
Ключевые слова: FCL inductive, HTS, matrix, patents, power equipment
Li Y., Qiao Y., Reeves J., Lenseth K., Selvamanickam V., Lee H.-., Xie Y.Y., Carota G., Funk M., Zdun K., Xie J., Likes K., Jones M., Hope L., Hazelton D.W.
Ключевые слова: HTS, coated conductors, YBCO, substrate Ni, IBAD process, PLD process, MOCVD process, fabrication
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.